Yeastar NeoGate TA1600
- All products
- IP PBX
- Yeastar NeoGate TA1600
- IP PBX
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.
Product Specification
| Ports | 16/24/32 FXS Ports |
| Telephony Interfaces | RJ11 and RJ21 50-pin Telco Connectors |
| WAN | 1 10/100Mbps |
| LAN | 1 10/100Mbps |
| Indicators | Ports Status and Activity LEDs |
| Protocol | SIP (RFC3261), IAX2 |
| Transport | UDP, TCP, TLS, SRTP |
| Codec | G.711 (alaw/ulaw), G.722, G.723, G.726, G.729A/B, GSM, ADPCM |
| Voice Capability | ITU-T G.168 LEC Echo Cancellation, Dynamic Jitter Buffer, PLC |
| DTMF Mode | RFC2833, SIP Info, In-band |
| Fax | T.38 and Pass-through |
| QoS | DiffServ, ToS, 802.1 P/Q VLAN tagging |
| Call Handling | 3-way Conference, Attended and Blind Transfer, Call Forward, Caller ID Display, Call Waiting, CDR, Direct Caller ID Calling, Distinctive Ringtone, Do Not Disturb, Flexible Dialing Plan, Hunting Groups, Hotline, MWI, Speed Dial |
| Firewall | Built-in Firewall, IP Blocklist, Attack Alert |
| Network | DHCP, DDNS, OpenVPN, Static Route, VLAN |
| Nat Traversal | Static NAT, STUN |
| Network Protocol | FTP, TFTP, HTTP, HTTPS, SSH |
| Provisioning | Web GUI, Auto Provisioning, Backup and Restore, Firmware Upgrade by HTTP/TFTP |
| Configuration | Remote Management*, Packet Capture, System Logs, Voice Menu for FXS Gateways Basic Configuration, API |
| Signaling | FXS Loop Start, FXS Kewl Start |
| Caller ID | BELL202, ETSI (V23), NTT (V23-Japan), and DTMF-based CID |
| Disconnect Methods | Busy Tone, Polarity Reversal |
| Short & Long Haul | 3REN, up to 1.5 km on 24 AWG wire |
| Power | AC 100-240V (12V 5.5A) |
| Dimensions | 440 × 250 × 44 |
| Operation Temperature | 0°C to 40°C, 32°F to 104°F |
| Storage Temperature | -20°C to 65°C, -4°F to 149°F |
| Humidity | 10-90% non-condensing |
| Mounting | Desktop, Rack-mount |
| Softswitch and IP-PBX | Interoperable with a wide range of IPPBX and softswitches |
| Ports | 16/24/32 FXS Ports |
| Telephony Interfaces | RJ11 and RJ21 50-pin Telco Connectors |
| WAN | 1 10/100Mbps |
| LAN | 1 10/100Mbps |
| Indicators | Ports Status and Activity LEDs |
| Protocol | SIP (RFC3261), IAX2 |
| Transport | UDP, TCP, TLS, SRTP |
| Codec | G.711 (alaw/ulaw), G.722, G.723, G.726, G.729A/B, GSM, ADPCM |
| Voice Capability | ITU-T G.168 LEC Echo Cancellation, Dynamic Jitter Buffer, PLC |
| DTMF Mode | RFC2833, SIP Info, In-band |
| Fax | T.38 and Pass-through |
| QoS | DiffServ, ToS, 802.1 P/Q VLAN tagging |
| Call Handling | 3-way Conference, Attended and Blind Transfer, Call Forward, Caller ID Display, Call Waiting, CDR, Direct Caller ID Calling, Distinctive Ringtone, Do Not Disturb, Flexible Dialing Plan, Hunting Groups, Hotline, MWI, Speed Dial |
| Firewall | Built-in Firewall, IP Blocklist, Attack Alert |
| Network | DHCP, DDNS, OpenVPN, Static Route, VLAN |
| Nat Traversal | Static NAT, STUN |
| Network Protocol | FTP, TFTP, HTTP, HTTPS, SSH |
| Provisioning | Web GUI, Auto Provisioning, Backup and Restore, Firmware Upgrade by HTTP/TFTP |
| Configuration | Remote Management*, Packet Capture, System Logs, Voice Menu for FXS Gateways Basic Configuration, API |
| Signaling | FXS Loop Start, FXS Kewl Start |
| Caller ID | BELL202, ETSI (V23), NTT (V23-Japan), and DTMF-based CID |
| Disconnect Methods | Busy Tone, Polarity Reversal |
| Short & Long Haul | 3REN, up to 1.5 km on 24 AWG wire |
| Power | AC 100-240V (12V 5.5A) |
| Dimensions | 440 × 250 × 44 |
| Operation Temperature | 0°C to 40°C, 32°F to 104°F |
| Storage Temperature | -20°C to 65°C, -4°F to 149°F |
| Humidity | 10-90% non-condensing |
| Mounting | Desktop, Rack-mount |
| Softswitch and IP-PBX | Interoperable with a wide range of IPPBX and softswitches |
Download Center
Similar Models
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.